Top 10 Reasons People Fail the Driving Test (2025-26)
Short answer: the most common reason people failed the car driving test in 2025-26 was not making effective observations at junctions. It has been number one in every year of DVSA’s records, from 2007-08 to 2025-26. Not using mirrors correctly when changing direction was second, and incorrect positioning when turning right at junctions was third.
In 2025-26, 1,998,621 car tests were taken in Great Britain and 1,000,043 were passed, so 998,578 tests ended in a fail. This guide lists the ten faults that DVSA says caused the most of those fails, what changed from the year before, and what each one looks like on the road.
The ranking comes from DVSA table DRT121F on GOV.UK. DVSA publishes the order only, not the number of fails for each fault, so we can say which fault is more common but not by how much. The financial year runs from April to March, so 2025-26 means April 2025 to March 2026.
How you fail a driving test
Under the GOV.UK pass mark, you pass if you make no more than 15 driving faults (often called minors) and no serious or dangerous faults (majors). A serious fault is something potentially dangerous. A dangerous fault involves actual danger to you, the examiner, the public or property. One serious or dangerous fault is enough to fail.
So the top 10 is really a list of the areas where examiners most often see driving that crosses that line.
The top 10 reasons for failing in 2025-26
| Rank | Fault (as DVSA records it) | In plain words | Rank in 2024-25 |
|---|---|---|---|
| 1 | Junctions - observation | Not looking properly before pulling into a new road | 1 |
| 2 | Mirrors - change direction | Not checking mirrors before turning or changing lane | 2 |
| 3 | Junctions - turning right | Wrong position or obstructing traffic when turning right | 4 |
| 4 | Response to signs - traffic lights | Getting traffic lights wrong | 5 |
| 5 | Control - steering | Steering too little, too late or onto the kerb | 6 |
| 6 | Move off - safely | Pulling away without checking it is safe | 3 |
| 7 | Response to signs - road markings | Ignoring lane arrows, box junctions or white lines | 7 |
| 8 | Response to signs - traffic signs | Ignoring or reacting late to signs | 8 |
| 9 | Positioning - normal driving | Driving too close to the kerb or centre line, or in the wrong lane | 9 |
| 10 | Maintain progress - speed | Driving too slowly or hesitating when it is safe to go | Not in top 10 |
Source: DVSA DRT121F. DVSA ranks the faults but does not publish how many fails each one caused.
What changed from 2024-25
The top two did not move, and eight of the ten held the same place or moved by one. Three changes stand out.
- Moving off safely dropped from third to sixth. It had been third in each of the three years before.
- Turning right at junctions rose from fourth to third, and traffic lights and steering each rose one place as a result.
- A new number 10. In 2024-25 the tenth reason was “use of speed”, which is about driving too fast. In 2025-26 it was replaced by “maintain progress”, which is about the opposite: driving too slowly or hesitating. Progress at an appropriate speed was last in the top 10 in 2021-22.
DVSA’s own explainer of the top 10 was last updated on 14 August 2025 and still describes the 2024-25 list, so the 2025-26 order in this guide comes straight from the data table.
What each fault looks like
The examples below are summarised from DVSA’s explainer and its guide to understanding your driving test result.
1. Observations at junctions
This covers looking properly before you move into a new road and making sure it is safe. DVSA’s examples include misjudging the speed of an approaching car so it has to slow down, entering a roundabout when a vehicle is coming from the right, looking too late when you are already partly into the road, and not recognising a crossroads at all. DVSA notes that ineffective observation was a factor in 47% of all road collisions in 2023 (Department for Transport table RAS0701).
2. Mirrors when changing direction
This means using all the mirrors before you change speed or direction. Typical fails are leaving a roundabout without checking mirrors, changing lane on a dual carriageway so another driver has to slow, and trying to change lane on a roundabout with a car alongside you.
3. Turning right at junctions
Getting into the wrong position to turn right. DVSA’s examples include sitting in the left-hand lane to turn right at a roundabout, positioning to the left when turning right at the end of a road, and waiting to turn right in a way that blocks traffic behind.
4. Traffic lights
Running a red light is the obvious one, but the examples also include stopping past the first white line at an advanced stop line for cyclists, not going on a green light when the junction ahead is clear, and going on green when the junction is blocked.
5. Steering
Steering too little or too late, for example on bends, when turning into side roads or when moving out past parked cars, and repeatedly mounting the pavement when pulling up on the left.
6. Moving off safely
Pulling away without the right checks. Examples are moving out from behind a parked car into the path of an oncoming vehicle, no blind spot checks when pulling away from the kerb, and no rear checks when moving off after the emergency stop.
7. Road markings
Not following lane arrows, straddling lanes on a roundabout, crossing double white lines where the nearer line is solid, entering a box junction when your exit is not clear, and not following markings at mini-roundabouts.
8. Traffic signs
Going the wrong side of a keep left sign, ignoring a stop or no entry sign, driving in a bus lane, choosing the wrong lane at a clearly signed roundabout, and reacting late or not at all to a change in the speed limit.
9. Positioning in normal driving
Repeatedly driving too close to the kerb or the centre of the road, staying in the right-hand lane of a dual carriageway for no reason, and cutting straight across a roundabout with no lane markings.
10. Maintaining progress
DVSA marks this when you do not drive at a speed that suits the road and traffic. Its common examples include not emerging from a junction when it is safe, driving unnecessarily slowly and holding up traffic, driving well below the limit on clear roads, and waiting for another driver who has clearly given way to you. In other words, being too cautious can fail a test as well as being too bold.
The same faults, year after year
DVSA’s table goes back 19 years, to 2007-08, and the list barely changes.
- Junction observations has been the number one reason in all 19 years.
- Mirrors when changing direction has been second every year since 2008-09.
- Turning right at junctions, steering, moving off safely and normal positioning have been in the top 10 in all 19 years.
- Reversing has dropped out. The old left reverse was last in the top 10 in 2010-11, and control during reverse parking was last there in 2022-23.
Pass rates have moved over that time (our guide to whether the driving test has got easier covers that), but the reasons people fail have stayed much the same. Most of them are about reading the road and checking around you, rather than handling the car.
Does the test centre change the reasons?
We can’t say. DVSA publishes the top 10 for Great Britain as a whole, not for each test centre, so there is no official data on whether, say, roundabout or bus lane faults are more common at one centre than another. What does differ by centre is the pass rate, and each test centre page shows its history.
If you want to know how much the centre matters compared with being ready, see does the test centre affect your chances and the highest pass rate leaderboard.
How to use this list
- Practise junctions on purpose. The top three reasons all happen at junctions or when turning. Ask your instructor to take you to the junctions and roundabouts near your test centre that you find hardest.
- Make your checks visible and early. Many of the examples are about looking too late or not at all, not about poor car control.
- Don’t overcorrect into hesitation. The new number 10 shows that waiting when it is safe to go is marked too.
- Use the DVSA guidance. DVSA says that if you regularly make any of these mistakes in lessons or practice, you’re not ready to take your test.
If you do fail, you’ll need to book again at least 10 working days away. Our guide to the pass rate by attempt shows how the odds change on a second or third try, and what the 50% national pass rate means explains how the headline figure is worked out.
Common questions
What is the most common reason for failing the driving test?
Not making effective observations at junctions. It was the top reason in 2025-26 and has been number one in every year of DVSA’s data since 2007-08.
What are the top 3 reasons for failing the driving test in 2025-26?
Junction observations, not using mirrors correctly when changing direction, and incorrect positioning when turning right at junctions.
Can you fail for driving too slowly?
Yes. “Maintain progress” was the tenth most common reason for failing in 2025-26. DVSA’s examples include not emerging when it is safe and driving well below the limit on clear roads.
How many faults can you get and still pass?
Up to 15 driving faults, as long as you make no serious or dangerous faults.
How many people failed the driving test in 2025-26?
Of 1,998,621 car tests in Great Britain, 1,000,043 were passed, so 998,578 were not.
Sources
- DVSA, Driving test and theory test data: cars: DRT121F (top 10 faults, 2007-08 to 2025-26) and DRT121A (car driving tests by financial year, Great Britain). Open Government Licence v3.0.
- DVSA, Top 10 reasons for failing the driving test in Great Britain (updated 14 August 2025).
- DVSA, Understanding your driving test result: car driving test.
- GOV.UK, Driving test faults and your result.